Grass Valley K2 Summit Client v.9.2 - Manual (Page 17)

3. In Network and Sharing Center, select Change adapter settings .
Network Connections opens and displays network adapters, including the following:
• Control Connection #1
• Control Connection #2
• Media Connection #1
• Media Connection #2
4. For each Control Connection and each Media Connection, do the following:
a) Right-click the connection and select Properties .
The Connection Properties dialog box opens.
b) In the Connection Properties dialog box, click Configure .
The Adapter Properties dialog box opens.
c) In the Adapter Properties dialog box, click the Advanced tab.
d) On the Advanced tab, in the Settings list select Large Send Offload v2 (IPv4) and then in the
Value drop-down list select Disabled .
e) Click OK to save settings and close.
f) Repeat these steps for each Control Connection and each Media Connection.
Next, disable CPU power technology.
Disable CPU Power Technology
1. Restart the K2 Summit/Solo system.
2. During the BIOS startup screen, press F2 repeatedly until Entering Setup... appears.
The BIOS screen opens.
3. On the BIOS screen, use arrow keys and select the Advanced tab.
4. On the Advanced tab select CPU Core Configuration and then press Enter .
The CPU Core Configuration screen opens.
5. On the CPU Core Configuration screen, select Power Technology and then press Enter .
A Power Technology dialog box opens.
6. In the Power Technology dialog box select Disable and then press Enter .
7. Press F4 to save and exit.
A Save & Exit Setup dialog box opens.
8. In the Save & Exit Setup dialog box, select Yes and then press Enter .
9. The K2 Summit/Solo system restarts.
Next, install the SiteConfig Discovery Agent.
20140204 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 17
Installing software and CPU carrier module upgrades