Grass Valley K2 Summit Client v.9.2 - Manual (Page 41)

Installing a MPEG/Multi-Cam codec option
upgrade
Prerequisites:
• K2 software version 8.1 or higher is required
Tools and materials needed:
• Codec option card
• #1 Phillips screwdriver
This section provides instructions for the following field kits:
Description Upgrade Nomenclature
K2 Summit 3G MPEG2 Multicam encoding field. Adds the ability
to record up to 4 video streams per codec module using MPEG2
compression when used in ChannelFlex mode. Includes hardware
and additional MPEG encoding license and
K2_APPCENTER_ELITE. Two K2-XDP2-MPG-FK kits are required
for the K2-XDP2-04 and enables up to 8 video streams to be recorded. K2-XDP2-MPG2-MC-FK
CAUTION: This system contains board-level components that must be protected from static
discharge and physical shock. Wear a wrist strap grounded to the system chassis when handling
system components.
1. If you intend to upgrade K2 software along with this Field Kit upgrade, upgrade K2 software
first, then continue with this procedure.
2. Shutdown the K2 Summit system.
20140204 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 41