Grass Valley K2 Summit Client v.9.2 - Manual (Page 23)

8. After restart, to verify that the software is installed, on the Windows desktop right-click My
Computer and select Manage .
The Computer Management window opens.
9. In the left pane select Device Manager .
10. In the right pane open the System devices node and verify that GVG ISCSI Multi-Path Device
Specific Module is listed.
Next, do one of the following:
• If the K2 Summit system does not have a Fibre Channel card, skip ahead and do final steps.
• If the K2 Summit system has a Fibre Channel card, install the Fibre Channel card driver.
Install the Fibre Channel card driver
If the K2 Summit system is on a redundant K2 SAN or is connected to direct-connect storage, make
sure that MPIO software is installed.
If your K2 Summit system has the optional Fibre Channel card, the driver for the Fibre Channel
card is not installed on the recovery image provided by Grass Valley for that K2 Summit system.
Therefore, after restoring the image, you must install the Fibre Channel card driver.
A K2 Summit system can have one of the following types of Fibre Channel cards:
• LSI
• ATTO
Depending on the type of Fibre Channel card in the K2 Summit system, do the appropriate task
from this section to install the Fibre Channel card driver.
20140204 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 23
Installing software and CPU carrier module upgrades