Grass Valley K2 Summit Client v.9.2 - Manual (Page 22)

2. If the License Manager says the licenses are not for this machine then the hardware for the
network interfaces has changed. Contact Grass Valley Customer Service to order new replacement
licenses.
Next, from the following list, do those tasks that apply to the K2 Summit/Solo system. Follow
instructions in related topics later in this document as necessary.
• If a K2 Summit system with direct-connect storage or shared storage on a redundant K2 SAN,
install MPIO software.
• If a K2 Summit system with a Fibre Channel card, install the Fibre Channel card driver.
If none of the tasks above apply to the K2 Summit/Solo system, skip ahead and do final steps.
Install Multi-Path I/O software
Do this task on a 64-bit K2 Summit system with direct-connect storage or shared storage on a
redundant K2 SAN.
1. Access the Windows desktop on the computer on which you are installing MPIO.
You can do this locally with a connected keyboard, mouse, and monitor or remotely via the
Windows Remote Desktop Connection.
2. Access the Windows desktop on the computer on which you are installing MPIO.
You can do this locally with a connected keyboard, mouse, and monitor or remotely via the
Windows Remote Desktop Connection.
3. Stop all media access. If AppCenter is open, close it.
4. Click Start | Run , type cmd and press Enter .
The MS-DOS command prompt window opens.
5. From the command prompt, navigate to the
C:\profile\mpio
directory.
6. Type the following at the command prompt:
gdsminstall64.exe -i
7. Restart the computer on which you installed MPIO.
22 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 20140204
Installing software and CPU carrier module upgrades