Grass Valley Jupiter v.1.0.0 - Manual (Page 67)

Jupiter AccuSwitch Soft Panels and Status Display Instruction Manual 59
Configuration
2. Click the Remove button. When the application is removed, the
InstallShield Wizard Completed screen will then appear.
Figure 70. Remove the Program Screen
3. Click the Finish button. The InstallShield Wizard Completed screen will
then close.
Configuration
VSD PC IP Settings
The PC, which the Jupiter VSD application is installed on, must have
network settings that allow communication with the Jupiter AccuSwitch
Controller. Consult with your Network administrator for this information.
VSD Application Settings
During the following steps, you will need to know the IP address of the
primary AccuSwitch Controller (and secondary, if installed) that will be
associated with the VSD. Use the Jupiter File Server JNS Control Center
application “Board Info” tab to determine the AccuSwitch Controller IP
address (the Control Center application is described in the Jupiter CM-4000
Installation and Operating manual).
1. Launch the VSD application. This will display the main VSD screen
shown in
Figure 71 with the Router Connection Settings dialog open.