Grass Valley Jupiter v.1.0.0 - Manual (Page 35)

Jupiter AccuSwitch Soft Panels and Visual Status Display Instruction Manual 27
Multi-Level XY Soft Panel Operating Procedures
Figure 31. Status Row
Swap/Undo
After each switch, the previous source automatically returns to the Preset
row so that each “Take” causes the last two sources to flip-flop. (The Preset
row is cleared when a new destination is selected.)
Level Breakaways (Split Switching)
This function allows different sources to be selected for different levels. For
example, the ability to switch the video without having to switch the audio
as well.
Checking Status of Selected Level
Select the desired destination category and entry. The status of each router
level will then be shown in the Status row.
Performing a Breakaway Switch
To perform a breakaway switch:
1. Select the desired destination category and destination entry.
2. Toggle on/off the desired level(s) by clicking the level in the Status row.
This will outline the fields for the selected level(s).
Figure 32. Status Row Selected
3. Select the desired source category and source entry.
This will load the Preset field(s) for the selected level(s).
4. Press the Take button to execute the breakaway switch.
When the switch is complete, if the Sticky Levels button is selected, the panel
will revert to all-level switching. If the Sticky Levels button is selected then
the selected levels remain selected, otherwise all level will be deselected.