Grass Valley Jupiter v.1.0.0 - Manual (Page 15)

Jupiter AccuSwitch Soft Panels and Visual Status Display Instruction Manual 7
Configuration
Configuration
Soft Panel PC IP Settings
The PC, on which the Soft Panel application is installed, must be configured
to communicate with the Jupiter AccuSwitch Controller. Consult with your
Network administrator for this information.
Soft Panel Application Settings
During the following steps, you will need to know the IP address of the
primary AccuSwitch Controller (and the secondary, if it is installed) that
will be associated with the Soft Panel and the PC’s IP address. Use the
Jupiter File Server JNS Control Center application’s Board Info tab to deter-
mine the AccuSwitch Controller IP address (the Control Center application
is described in the Jupiter CM-4000 Installation and Operating manual).
Note Consult with your Network administrator if you do not know the network
values to enter.
1. Launch the Soft Panel application. This will display the main Soft Panel
screen (
Figure 8 ).
Figure 8. Basic XY Soft Panel Startup Display Example