Grass Valley Jupiter v.1.0.0 - Manual (Page 17)

Jupiter AccuSwitch Soft Panels and Visual Status Display Instruction Manual 9
Configuration
8. Select the IP address for the PCs NIC card from the PC IP Address drop-
down list, if it is not already selected (See Soft Panel PC IP Settings
on
page 7 ).
Note If you have more than one NIC card, consult your IT department to determine
which IP Address will be able to communicate with the Jupiter Network
(AccuSwitch control board).
9. Click the Connect button.
Saving the Device Settings
Save the settings by selecting Save Settings from the File menu (File > Save
Settings). The Save Device Settings dialog will then appear.
To save the device settings:
1. Create a name for the settings file. For example, the Panel Name “ES-
LAN2” could be used.
2. Click the Save button ( Figure 10 ).
Figure 10. The Save Button
The current connection settings are then saved to the "NetworkSet-
tings.xml" file, which is located in the installation directory for the specific
control panel. For example, C:\Program Files\Thomson\Jupiter Basic XY,
would be the location for the settings for the Basic XY panel.
The Save
button