Grass Valley CopperHead Pro - Manual (Page 69)

63
Camera Unit Connectors
Camera Unit Connectors
Reference Numbers refer to the overview diagrams in Base Station: 12Volt DC (single/dual)
on page 80.
Camera Remote and Tally
The following table lists the Camera Unit remote DB15HD pinouts. See CHCR-PRO Camera
Unit Remote Cable on page 73 for a list of Camera Remote Cables.
Camera Unit #14
• DB15HD Female (Ext View)
• Pin 10 (Data 1 Format select)
• Floating for RS-422 or TTL
• Tied to GND for RS-232
• Tied to +12VDC for RS-485
Signal
Function Pin # RS232 RS422 TTL RS485
Data 1 (Camera Control)
RS232/ 422/485
8 IN (+) IN IN (+) I/O
2 - (-) IN (-) I/O
6 OUT (+) OUT OUT -
1 - (-) OUT -
10
Data Format
Tie to GND Float Float Tie to +12VDC
pin 15
5, 7 GND
Format Bias 15 Format Bias +12VDC
GPIs
13 GPI/Relay Output Contact A
14 GPI/Relay Output Contact B
Data 2 (RS422 only)
3 N/A (-) IN N/A N/A
9 N/A (+) IN N/A N/A
11 N/A (-) OUT N/A N/A
12 N/A (+) OUT N/A N/A
Not Used 4 Future