Figure 3-23, 10 on, Figure 3 – Grass Valley CopperHead Pro User Manual

Page 38

CopperHead System Components

PowerPlus 3000 - Camera Power Adaptor

Fig. 3-23: PowerPlus 3000 Connectors

• 7: Heat Sink

• LP- Low Profile Heat Sink rated for 100 Watts (shown)

• HP - High Profile Heat Sink rated for 150 Watts

• 8: 12 Volt Auxiliary Output: 4-Pin XLR output connector for 12 Volt accessories

• 9: 24 Volt Auxiliary Output B: 3-pin connector for 24 Volt accessories.

• 10: 24 Volt Auxiliary Output A: 3-pin connector for 24 Volt accessories.

• 11: Tactical Fiber Dongle: fixed tactical fiber cable connects to the CopperHead

Camera Unit.

• 12: SMPTE Swivel: adjustable swivel for SMPTE 304M receptacle am.

• 13: SMPTE 304M Hybrid Fiber Receptacle: connect the SMPTE hybrid cable here. This

cable connects to the PowerPlus.

• 14: Tactical Fiber Connector (MX shown): dry fiber connector at the end of the

dongle. This should match the connector on the swivel of the mating CopperHead
Camera Unit. Available with the following termination:

• MX plug (shown)

• OpticalCON Connector ("dry")

• SMPTE 304M plug ("dry")