Grass Valley CopperHead Pro - Manual (Page 51)

45
CopperHead Pro
User Guide
Tactical Fiber between Base Station (powered) and Camera Unit
Fig. 4-10: SMPTE Hybrid Fiber between Base Station (powered) and Camera Unit
• Connect a length of tactical fiber cable A between Camera Unit B and Base Station C.
• At each end of the fiber cable will be either an OpticalCON or MX fiber connector
(F and G).
• The camera must be powered by local power, such as a battery or a local AC power supply
H.
SMPTE Hybrid Fiber between Base Station (powered) and Camera Unit
Fig. 4-11: SMPTE Hybrid Fiber between Base Station (powered) and Camera Unit
Connect a length of SMPTE Hybrid fiber cable A between Camera Unit B and the fiber
receptacle C on the back of Base Station D.
At each end of the fiber cable will be either an OpticalCON or SMPTE 304M Hybrid fiber
connector E and F.
The camera will be powered by the CopperHead PowerWafer Camera Power Supply G.