Grass Valley CopperHead Pro - Manual (Page 27)

21
CopperHead Pro
User Guide
Base Station
The CopperHead Base Station is available with a number of options. The unit is ordered
with a specified Power Module, Audio/Intercom Module, and Fiber Connector. For an
overall view of component location,see
Overview Diagrams on page 78.
Base Station Front Panel
Fig. 3-8: Base Station Front Panel - single unit, 120/220 VAC power w/internal hybrid power supply
Fig. 3-9: Base Station Front Panel - dual unit, 12 VDC power
The front of Base Station has three features:
• A: Signal Status Indicators (see Front Panel Section A - Signal Status Indicators on
page 21)
Applies if Dual Base Station, A1 and A2. Otherwise, only A2 applies.
• B: Power Switch and Indicator (see Front Panel Section B- Power Switch and Indicator
on page 22)
• C: Hybrid Power Status Indicators (see Front Panel Section C- Hybrid Power Status
Indicators on page 23)
Front Panel Section A - Signal Status Indicators
Fig. 3-10: Base Station Status Indicators
• 1: Link: indicates the status of the data link from Camera Unit to Base Station. This is a
good indicator of adequate optical link.
• Green when Base Station has a data "lock" with Camera Unit.
• Red when Base Station is not "locked" to Camera Unit.
A data lock means that the fiber link is valid and data can be exchanged securely.
Note: These indicators only appears on Base Stations equipped with
internal hybrid power supply.