Grass Valley CopperHead Pro - Manual (Page 53)

47
CopperHead Pro
User Guide
MPS Power Supply E to AC Mains F. Connect a length of hybrid fiber cable G between the
powered connector H on the MPS Power Supply E and the swiveled fiber connector I on
Camera Unit J. The hybrid fiber cable can be equipped with either OpticalCON or SMPTE
304M connectors K. The camera and Camera Unit will be powered via the hybrid cable by
the PowerWafer L.
The "dry" fiber connectors D on the MPS Power Supply E and the "dry" fiber connector(s) B
on Base Station C can equipped with one of two connector options:
• Two ST connectors (shown)
• OpticalCON connector
The powered fiber connectors H on the MPS Power Supply E and the fiber connector I on
Camera Unit J be equipped with one of two connector options:
• Two ST connectors (shown)
• OpticalCON connector
Other fiber optic connectors are available by special order. Contact Grass Valley (see
Contact Us on page 57) or your CopperHead dealer for more information.