Grass Valley CopperHead Pro - Manual (Page 44)

38
Camera Unit and Power Supply Installation
Mounting the CopperHead Pro Camera Unit with the PowerPlus
2 Mount the PowerWafer C to the CopperHead Pro Camera Unit battery mounting plate
D exactly as you would mount the battery to the camera.
3 Connect the supplied PowerWafer connector cable E. (model CH3CP-INF-FAG2)
between the PowerWafer C and the PowerWafer connector on Camera Unit A.
4 For best results, plug the straight connector F into the PowerWafer and the connector
with the Right Angle G into the Copperhead Camera Unit.
Mounting the CopperHead Pro Camera Unit with the PowerPlus
The PowerPlus allows the camera and Camera Unit to be powered via hybrid fiber cable for
extra-long distances at higher power than the PowerWafer. The PowerPlus is powered via
the hybrid fiber cable from the HDX Power Supply.
Fig. 4-4: Mounting the PowerPlus Unit to the CopperHead Pro Camera Unit
Fig. 4-5: PowerPlus on CopperHead Pro