Product returns about this user guide, Safety and fiber optic systems, Optical fiber safety power fuses – Grass Valley CopperHead Pro User Manual
Page 10: Product returns, About this user guide, Optical fiber safety, Power fuses
4
About CopperHead Pro
Product Returns
Product Returns
In the unlikely event of damage to your CopperHead Pro during shipping or delivery, take
note of any damage with the delivery or shipping service and document the packaging and
product where you see this damage. If any component does not work correctly out of the
box, contact Grass Valley (see
If the problem cannot be remedied through a service telephone call,you will receive an
RMA number (Return of Merchandise Authorization). Take note this RMA number inside
and outside of all shipping boxes and on all documentation provided with the items to be
returned.
About this User Guide
This user guide is designed to cover all of the various options and so not every page in this
guide will apply to your specific system.
Safety and Fiber Optic Systems
Optical Fiber Safety
Never look directly into the end of the optic fiber while either end of the system is
operating.
Always use cable connector caps when the cables are not connected. This protects the
connector from damage and the unlikely event of exposure to an operating optical link.
Keeping the caps in place when the connectors are not in use will prevent dirt and dust
from entering the connector and degrading the performance of the optical link.
Power Fuses
The CopperHead Pro Base Stations
CHG3‐BS‐PRO‐95VD‐XXX‐XXX
are equipped with two
fuses located next to the AC Power receptacle at the left rear of the unit. Refer to
Input Connector- Models CHG3-BS-Pro-95VD-xxx-xxx
on page 65 for specific fuse and
location information.
NEVER operate the CopperHead CHG3-BS-PRO-95VD-XXX-XXX Base Station without
properly installed and rated fuses. Severe electrical and heat damage could result as well as
personal injury or death.