Copperhead pro transceiver system components – Grass Valley CopperHead Pro User Manual
Page 16
10
System Overview
CopperHead Pro Transceiver System Components
CopperHead Pro Transceiver System Components
The CopperHead Pro Camera Unit fits between the battery or optional power supply and
the camera. The Camera Unit is configured at time of purchase with mounting plates to
accommodate the appropriate camera battery type.
The camera battery or optional power source attaches to Camera Unit, which in turn,
attaches to the video camera. Batteries accommodated are Anton/Bauer Gold Mount and
Sony "V" Mount. Other camera mounting plates may be available by special order. Contact
Grass Valley (see
on page 57) or your authorized dealer.
The Camera Unit is equipped with a swivel-mounted fiber optic connector, which can be
ordered with an OpticalCON, MX or SMPTE 304M connector. For more information, see
Fig. 2-5: Camera Unit Front and Rear
The actual appearance of your CopperHead Pro Camera Unit will vary depending on the
battery mount and fiber cable connector options specified at the time of purchase.
Camera Unit Front
(attaches to the camera)
Camera Unit Rear (attaches to
battery or power supply)