Rear panel section c - signal connectors – Grass Valley CopperHead Pro User Manual
Page 32
26
CopperHead System Components
Base Station Rear Panel
Rear Panel Section C - Signal Connectors
Fig. 3-16: Rear Panel Signal Connectors
• 5: Connector for Camera Remote Control Panel and Tally input (DB15HD): connect
CHBR-PRO cable here, specified for your particular Camera Remote Control Panel.
See
CHBR-PRO Base Station Remote Cable
on page 74 to specify the correct cable for
your Camera Remote Control Panel.
• 6: Base Station Intercom Connector: connect your house intercom system here:
• XLR3: Two-wire (Clear-Com or RTS)
• XLR5M: Four-wire (matrix-style)
For more information, refer to
• 7: SD/SDI or HD/SDI Output: digital video from camera's SDI output
• 8: VBS Return Input: analog composite video signal sent to Camera Unit
• 9: VBS Return Input Switch: switches the VBS Return Input connector to be optimized
for one of two uses:
• A: Sync In: Genlock/Sync/Tri-Level sync signal.
• B: Composite Video In: typically used to send analog VBS return video to the
camera or an external monitor.