Grass Valley CopperHead Pro - Manual (Page 52)

46
Camera Unit and Power Supply Installation
Hybrid Fiber between Base Station (powered) and Camera Unit
Hybrid Fiber between Base Station (powered) and Camera Unit
Fig. 4-12: Hybrid Fiber between Base Station and Camera Unit (Infrastructure Wiring)
A remotely-mounted fiber connector can be used for permanent installations such as
communications closets, truck connector panels and within/between buildings. A panel D
with two STs (fiber) and a Molex connector (power) is mounted on Base Station C.
Infrastructure fiber and copper wiring from Base Station connect to a remote panel-
mounted OpticalCON or SMPTE 304M receptacle E. A standard hybrid fiber optic cable A
connects the panel- mounted receptacle and Camera Unit B, equipped with a
PowerWafer G.
Hybrid Fiber Cable between MPS Power Unit and Camera Unit
Fig. 4-13: Hybrid Fiber cable between the MPS Power Supply and Camera Unit
Dry fiber can be used between Base Station and the MPS External Power Unit, and the
camera can be powered by the MPS over powered hybrid fiber.
Connect "dry" (unpowered) single mode fiber cable A between the fiber connector(s) B on
Base Station C and the "dry" fiber connector(s) D on the MPS Power Supply E. Connect the