Grass Valley CopperHead Pro - Manual (Page 40)

34
CopperHead System Components
HDX Status Indicators
HDX Status Indicators
Fig. 3-25: HDX Displays
• 1: AC IN - MAINS: AC Input power is present
• 2: DC HV ENABLE: DC "Sense" voltage from PowerPlus is present
• 3: AC HV ENABLE: AC "Sense" voltage from PowerPlus is present
• 4: HV Present: AC or DC voltage is available on Hybrid connector
• 5: CABLE OPEN: no camera cable connected
• 6: CABLE SHORT: camera cable non-functional due to a short
• 7: REMOTE PWR ENABLE
• Red: if local/remote sw in remote position and opt power <= -27 dBm
• Green: if local/remote sw in remote position and opt power >= -24 dBm gates HV
power
• 8: LOAD TYPE: indicates the type of load or camera being used:
• N/A - No load detected
• PWR+ - PowerPlus detected
• 9: Optical Power: not used with PowerPlus.
• 10: Local Remote: not Used With PowerPlus.