Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 90)

76
Aurora Edit Installation Guide November 25, 2008
Chapter 2 Using Final Cut Pro With Aurora Edit
6. Select the port you want to change and click
Modify
.
The Modify Port Settings window appears:
7. Enter a port
Description
, set the
Speed
to
100
, and click
OK
.
8. Click
OK
to close the Port Settings window and exit the Cisco Network Assistant.
Configuring the Mac
MacOS 10.4.x (Tiger)
To set your Mac network to 100BaseT:
1. Under the Apple menu, select
System Preferences
.
2. Click
Network
.
3. In the Network window, select
Built-in Ethernet
and click the
Configure
button.
4. Under the Ethernet tab, select the following options:
Configure Manually (Advanced)
Speed 100baseTX