Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 51)

November 25, 2008 Aurora Edit Installation Guide
37
Setting Options
Configuring Timeline Options
Setting Options Description
Output Channels 1 - 16 Select the number of output channels to use in your sequence;
configure panning and routing from via
Default Mix
settings.
Digital Reference Level -20, -18, -12 Select the preferred dBFS level, which is indicated on audio
meters with a blue tick mark. This setting does not alter
recorded audio in any way; it moves the reference level so
editors in different regions can ride audio at their preferred
level of headroom.
Default Mix Configures pan control and channel routing for each track of
the Timeline.
1. Click Settings .
2. Select Monitor Mix or Output Mix .
• Monitor Mix controls panning and channel output for
speakers in the edit bay, and does not affect sends to the
server, play to tape, or live playout.
• Output Mix controls the panning and channel output for
the actual sequence output for playout.
3. Set the pan control by dragging the pan slider for an audio
channel to the right or left position; alt-click on a pan slider
to set the pan direction to center. By default, odd-numbered
channels pan to the left and even-numbers channels pan to
the right. Changing the pan direction affects the entire track
in a sequence.
4. Route audio channels by selecting specific channels ( 1+2 ,
3+4 , etc.) or All .
Default routing for two-channel systems is as follows:
• Left >> Channel 1
• Right >> Channel 2
• Center >> All channels
If you have more than eight audio tracks, click the Bank Select
arrow to access the additional tracks on Bank 2.
Undo/Redo Limit 1 - 1024 Enter the number of undo levels to track; 32 is the default.
NOTE: Increasing the number of undo levels increases Aurora
Edit’s system memory usage.
Default Play Speed Enter the speed at which to play clips when reviewing them in
the Timeline; 200% is the default.
Review Edit Duration Enter the amount of preroll to play on a clip prior to playing an
edit; 3 seconds is the default.
Output Channels 1-8 Select the number of output channels to use; 4 is the default.