Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 85)

November 25, 2008 Aurora Edit Installation Guide
71
Mounting V:\ from MacOS 10.5.x (Leopard)
Mounting V:\ from MacOS 10.5.x (Leopard)
Before mounting the V:\ drive, you must first configure the Mac’s Ethernet interfaces.
Once configured, you can mount the drive manually via the Finder or automatically via
AppleScript.
Mapping the network drive
1. In Aurora Edit, choose
Tools | Options | Timeline
.
2. In the Final Cut Pro Network Mapping field, enter
file:///Network/V
.
3. Click
OK
.
Configuring Ethernet Addresses
The Mac uses the FTP network to access the K2 system’s media drive, and the Control
network for accessing Scripts and Placeholders from Aurora Playout (version 7.0). You
must configure the Ethernet interfaces with addresses on these two networks:
1. Open System Preferences and select
Network
.
2. Select
Edit Locations
from the
Location
list.
3. Click
+
to add a new location, name it
K2 Edit in Place
, and click
Done
.
4. Select
K2 Edit in Place
from the
Location
list.
5. Configure one Ethernet interface to an IP address on the K2 Control network, and the
other to an IP address on the K2 FTP Network.