Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 34)

20
Aurora Edit Installation Guide November 25, 2008
Chapter 3 Installing and Licensing Aurora Edit Software
7. When asked to connect to Windows Update, Select
No, not this time
and click
Next
.
8. Select
Install from a list or specific location
and click
Next
.
9. Select
Search for the best driver in these locations
, specify the location of the new
driver: C:\Program Files\Grass Valley\Aurora\Drivers\AJA\Xenahddriver (or
Xenasddriver), and click
Next
.
Windows installs the new driver.
10. Reboot Windows if prompted.
Configuring the Disk Volume
When you install Aurora Edit software for the first time, you will see the Disk Volume
Configuration window. You must configure a shared volume for your type of network
and equipment. The Disk Volume Configuration only needs to be done once on each
shared volume, on the first Aurora Edit system on which the software is installed.
To configure the disk volume:
1. Select the disk volume drive letter and configure the volume as follows:
2. Click
OK
to save changes and return to the software installer.
Setting Options Description
Disk Volume Type Unknown
LocalDisk
NAS
K2 Storage
Open SAN Select your type of shared storage.
Disk Volume Model Unknown
Grass Valley PFR500,
PFR600, PFR700, PFR800
Ciprico 1700, 2400, 3600
IBM NAS
NAS:
Choose
Ciprico 1700
,
2400
,
3600
, or
IBM NAS
.
K2 Storage:
Choose
Grass Valley PFR700
.
Security Options Supported
Not Supported Select Supported if your system uses Domain
Security; otherwise, select Not Supported .