Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 88)

74
Aurora Edit Installation Guide November 25, 2008
Chapter 2 Using Final Cut Pro With Aurora Edit
The defaults in the example work for a Mac that is not part of any workgroup or
domain, connecting to a K2 SAN system set up as workgroup with the FTP address
192.168.50.10 so the V: drive is shared on the correct (FTP) network and not on the
control network.
If your system is inside a domain amend the set K2_share command to:
set
K2_share
to
"smb://" & domain & ";" & username & ":"
& pass & "@" & K2FTP_IP & "/" & sharedirectory1
3. Test the script and confirm that it works.
4. Choose
File | Save
and name the script; change the save location if necessary.
5. Set the
File Format
to
Application
and select the
Run Only
option.
6. Click
Save
.
If you would like the script to run each time you log in, you can add it to your Login
Items (
System Preferences | Accounts | Login Items
).