Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 42)

28
Aurora Edit Installation Guide November 25, 2008
Chapter 4 Configuring Your System
The Add Source window appears:
3. Go through each Add Source tab to configure the new source.
The following sections describe each tab in the Add Source window.
4. Click
OK
when you are done.
Setting General Source Options
* Aurora Edit LD can create Clip and Microphone sources only.
Setting Options Description
Source Name Enter a name for the source, such as Tape Deck.
Description Enter a description for the source.
Source Type Video Source Select
Video Source
for all incoming sources, including audio.
Clip Source* Select
Clip Source
to use an existing clip in the bin as a source.
Microphone* Select
Microphone
for any microphone sources.
1394 Source Select
1394 Source
when connecting to a specific 1394 source if
multiple IEEE devices are present.