H3C Technologies H3C Intelligent Management Center - Manual (Page 99)

91
Figure 17 Configure basic information
3. Add match rule for classifier:
a. Click Add on the toolbar.
The Classifier Characteristics window appears.
b. Select Match IPv4 Address from the list of Type, and configure the following parameters:
− Name—Enter name Admin to Computing Server.
− State—Select Enabled from the list.
− Relation—Select =(match).
− IPv4 Source Address—Enter 90.16.50.0/24.
− IPv4 Destination Address—Enter 192.168.1.3.
c. Click OK.