H3C Technologies H3C Intelligent Management Center User Manual
Page 65
57
You cannot specify where to store a behavior when creating it. To add a behavior to a folder, first enter
the folder.
You cannot add a behavior to the predefined folder.
To add a behavior:
1.
Access the behavior list page.
2.
Click Add.
The Add Behavior page appears.
3.
Configure the basic information for the behavior:
{
Name—Enter a name for the behavior. The name can contain from 1 to 31 alphanumeric and
special characters. Spaces and the following characters are not allowed:
\/:;*?"<>|
{
Description—Enter a description for the behavior.
{
Select Model—Select applicable device models for the behavior by using the following
procedure:
−
Click the Select Model button next to the field.
The Select Model dialog box appears.
−
In the Query Criteria area, enter a model name or system OID, and click Query.
−
Select one or more models, and click OK.
The selected models are added to the Select Model field.
−
To remove one or more device models from the field, select the models that you want to
remove, and click Delete Model.
You can use the Ctrl or Shift key to select multiple models.
−
To remove all device models from the field, click Delete All.
4.
Configure actions for the behavior. Actions include the following:
{
CAR.
{
GTS.
{
Queuing and WRED.
{
Traffic marking.
{
Traffic mirroring.
{
Traffic redirection.
{
Traffic accounting.
{
Firewall.
Only basic parameters are displayed for the CAR, GTS, queuing and WRED, and traffic marking
actions. To configure more details for these actions, click the Config link for each action.
describes the parameters for each action.