H3C Technologies H3C Intelligent Management Center - Manual (Page 13)

5
Creating a QoS policy
A QoS policy associates classifiers with behaviors. A QoS policy can contain multiple classifier-behavior
associations.
To create a QoS policy:
1. Click the Service tab, as shown in Figure 3 .
2. From the navigation tree, select QoS Manager > QoS Resource > QoS Policy.
3. Click Add.
For more information about creating a QoS policy, see "
Adding a QoS policy ."
Figure 3 Creating a QoS policy
Creating a deployment task from the QoS policy
You can use a deployment task for a QoS policy to deploy the QoS policy to device interfaces or VLANs
and to monitor the deployment process.
To create a deployment task from the QoS policy:
1. Click the Service tab, as shown in Figure 4 .
2. From the navigation tree, select QoS Manager > Deploy Task.
3. Click Add.
QoSM provides multiple entries for creating a deployment task for a QoS policy. For more
information, see "
Adding an MQC deployment task ."