H3C Technologies H3C Intelligent Management Center - Manual (Page 35)

27
QoS function
Application
direction
Parameters
Software Queuing
(PQ)
This function does
not support
direction
configuration.
This function can be
configured only on
some interfaces on
routers.
PQ—Use PQ for traffic scheduling.
• Match Pql—Use a PQ list to classify traffic and assign
classified traffic to different queues.
Software Queuing
(CQ)
This function does
not support
direction
configuration.
This function can be
configured only on
some interfaces on
routers.
CQ—Use CQ for traffic scheduling.
• Match Cql—Use a CQ list to classify traffic and assign
classified traffic to different queues.
Software Queuing
(WFQ)
This function does
not support
direction
configuration.
This function can be
configured only on
some interfaces on
routers.
• Match Priority—Match the priority of packets.
{
DSCP—Match the DSCP value of packets.
{
IpPrecedence—Match the IP precedence value of
packets.
• Queue Length—Configure the queue length.
{
Queue Length Lower Limit—Start value of the value
range for the queue length.
{
Queue Length Upper Limit—End value of the value
range for the queue length.
• Queue Number—Configure the total number of WFQ
queues.
{
Queue Number Lower Limit—Start value of the value
range for the queue number.
{
Queue Number Upper Limit—End value of the value
range for the queue number.
{
Queue Dscp Length Lower Limit—Start value of the
value range for the queue DSCP length.
{
Queue Dscp Length Upper Limit—End value of the
value range for the queue DSCP length.