H3C Technologies H3C Intelligent Management Center - Manual (Page 81)

73
− Interface Count—Total number of interfaces on the device, including both physical
interfaces and virtual interfaces.
− Number of interfaces (inbound direction)—Number of selected interfaces. The QoS policy
will be deployed to the inbound direction of these interfaces.
− Number of interfaces (outbound direction)—Number of selected interfaces. The QoS policy
will be deployed to the outbound direction of these interfaces.
− Delete—Click the Delete icon to delete the corresponding device.
d. Click the Select Device Interface icon in the Number of interfaces (inbound direction)
column.
The window for selecting interfaces appears.
e. Select the interfaces where you want to deploy the QoS policy to the inbound direction. For
information about selecting interfaces, see "
Adding interfaces ."
f. Click OK to return to the Setting Deploy Apply Object tab page.
The number of selected interfaces is displayed before the
icon.
g. Click the Select Device Interface icon in the Number of interfaces (outbound direction)
column.
h. Select the interfaces where you want to deploy the QoS policy to the outbound direction.
To select device VLANs:
a. In the Apply Policy to VLAN area, click Select Device.
The window for selecting devices appears.
b. Select devices. For information about selecting devices, see " Adding devices ."
c. Click OK to return to the Setting Deploy Apply Object tab page.
The selected devices are displayed in a list.
Device list contents
− Device Name—Name of the device.
− Device Model—Model of the device
− VLAN (inbound)—IDs of selected VLANs. The QoS policy will be deployed to the inbound
direction of these VLANs.
− VLAN (outbound)—IDs of selected VLANs. The QoS policy will be deployed to the
outbound direction of these VLANs.
− Delete—Click the Delete icon to delete the corresponding device.
d. Click the Select VLAN icon in the VLAN (inbound) column.
The window for selecting VLANs appears.
e. Select the VLANs where you want to deploy the QoS policy to the inbound direction. For
information about selecting VLANs, see "
Adding VLANs ."
f. Click OK to return to the Setting Deploy Apply Object tab page.
The IDs of selected VLANs are displayed before the
icon.
g. Click the Select VLAN icon in the VLAN (outbound) column.
h. Select the VLANs where you want to deploy the QoS policy to the outbound direction.
4. Click Next to move to the Setting QoS Policy page.
5. Select a QoS policy or configure a new QoS policy.