H3C Technologies H3C Intelligent Management Center - Manual (Page 48)

40
• List Number—Number of the PQ list.
• Type—Type of match criteria.
• Details—Detailed configuration of match criteria.
• Queue Number—Number of the priority queue to which matching packets are assigned.
• Type—Type of the PQ list. Options are User Defined and System Defined.
• Operate—Click the Undeploy icon to undeploy the user-defined configuration of the PQ list.
Configuring a PQ list
Each PQ list has a system-defined configuration. By default, all packets are assigned to the normal queue.
You can configure a PQ list to assign packets meeting the specified match criterion to the specified
priority queue.
To configure a PQ list:
1. Access the QoS Configuration Info page.
2. Click the PQ List tab.
3. In the PQ List Configuration area, click Configure.
The PQ List Configuration window appears.
4. Configure the following parameters:
{
List Number—Enter a number for the PQ list, in the range of 1 to 16.
{
Type—Select a match criterion type and configure a value for the match criterion. Different
match criterion types have different configuration parameters. For information about match
criterion types and their configuration parameters, see "
Configuring a CQ list ."
{
Queue Number—Select a priority queue. Options are Top, Middle, Normal, and Bottom.
5. Click OK.
Deleting the configuration of a queue or a PQ list
You can delete the user-defined configuration of a priority queue or a PQ list. Then, the priority queue or
PQ list restores its default configuration.
You can delete the configuration of a single priority queue or a PQ list at a time or delete the
configurations of priority queues or PQ lists in batches.
To delete the configuration of a single priority queue or a PQ list:
1. Access the QoS Configuration Info page.
2. Click the PQ List tab.
3. Click the Undeploy icon in the Operate column for the priority queue or PQ list that you want
to delete.
A confirmation dialog box appears.
4. Click OK.
To delete the configurations of priority queues or PQ lists in batches:
5. On the PQ List tab page, select the priority queues or PQ lists that you want to delete.
6. Click Delete.
A confirmation dialog box appears.
7. Click OK.