beautypg.com

Modifying a behavior – H3C Technologies H3C Intelligent Management Center User Manual

Page 68

background image

60

Action

Description

Traffic Marking

Base Configuration:
Configure either of the following parameters:

IP Precedence—Select an IP precedence value in the range of 0 to 7.

DSCP—Select a DSCP value in the range of 0 to 63.

Advance Configuration:

MPLS EXP—Select an MPLS EXP value in the range of 0 to 7.

802.1P—Select an 802.1p priority value in the range of 0 to 7.

ATM CLP—Select a CLP value for ATM cells. The value range is 0 and

1.

FR DE—Select a DE value for Frame Relay packets. The value range is

0 and 1.

Custom VLAN ID—Enter a customer VLAN ID.

QoS Local ID—Enter a QoS local ID.

Drop Precedence—Select a drop precedence value in the range of 0 to

2.

Local Precedence—Select a local precedence value in the range of 0 to

7.

Service VLAN ID—Enter a service provider VLAN ID.

GTS

Base Configuration:

CIR—Specify the average traffic rate.

CBS—Specify the committed burst size allowed.

Advance Configuration:

EBS—Specify the excess burst size allowed.

Max Queue Length—Specify the maximum number of packets that can

be held in the queue. When the queue is full, all newly arriving packets

are dropped.

Mirror

Select the destination to which packets are mirrored. Options are
Interface, CPU, and VLAN.

Redirect

Select the destination to which packets are redirected. Options are CPU,
Interface, and Next Hop.

Account

Set traffic accounting. Options are Not Set and Enabled.

Firewall

Select a filtering action. Options are Not Set, Permit, and Deny.

5.

Click OK to add the configured behavior and return to the behavior list page.
To cancel the configured behavior and return to the behavior list page, click Cancel.

Modifying a behavior

You can modify user-defined behaviors. The predefined behaviors cannot be modified.
To modify a behavior:

1.

Access the behavior list page.

2.

Click the Modify icon for the behavior that you want to modify.
The Modify Behavior page appears.

3.

Modify the description and applicable device models for the behavior.