H3C Technologies H3C Intelligent Management Center - Manual (Page 101)

93
Figure 20 Match rule of FA-CptServer
Adding classifier to match the traffic from non-R&D departments to R&D department
1. Click Add on the toolbar.
The Add QoS Classifier page appears.
2. Configure the following parameters:
{
Name—Enter classifier name Admin-R&D.
{
Rule Relationship—Select and from the list.
{
Select Behavior—Leave this field empty.
{
IP Type—Select IPv4 from the list.
{
Description—Enter a description for the classifier. It is recommended that the description
includes classifier characteristics. This field can be blank.
{
Select Model—Leave this field empty.