Reloading the qos capability set for a device, Interface policy application, Accessing the qos configuration info page – H3C Technologies H3C Intelligent Management Center User Manual
Page 36
28
QoS function
Application
direction
Parameters
Software Queuing
(RTPQ)
This function does
not support
direction
configuration in
QoSM.
This function can be
configured only on
some interfaces on
routers.
•
Start Port—Configure the start port of a port range.
{
Lower Start Port—Minimum value for the start port.
{
Upper Start Port—Maximum value for the start port.
•
End Port—Configure the end port of a port range.
{
Lower End Port—Minimum value for the end port.
{
Upper End Port—Maximum value for the end port.
•
CBS—Configure the committed burst size allowed on the
interface.
{
Lower CBS—Start value of the value range for the
CBS.
{
Upper CBS—End value of the value range for the CBS.
•
Bandwidth—Configure the maximum bandwidth
allowed.
{
Lower BandWidth—Start value of the value range for
the bandwidth.
{
Upper BandWidth—End value of the value range for
the bandwidth.
Reloading the QoS capability set for a device
After a device is upgraded or its functional modules change, perform this task to ensure the QoS
capability set in QoSM is consistent with the actual QoS capability set of the device.
To reload the QoS capability set for a device:
1.
Access the QoS Device page.
2.
Click the Operation icon
for the device, and select Reload QoS Capability Set from the menu.
Accessing the QoS Configuration Info page
On the QoS Configuration Info page, you can view the current QoS configurations of a device and
deploy or quickly undeploy QoS configurations.
To access the QoS Configuration Info page:
1.
Access the QoS Device page.
2.
Click the Operation icon
for the device, and select QoS Configuration Info from the menu.
The QoS Configuration Info page appears and includes many tabs. By default, the Interface Policy
Application tab page is displayed.
The following subsections describe each tab on the QoS Configuration Info page:
Interface Policy Application
The Interface Policy Application tab page lists interfaces deployed with CBQ policies or interface QoS
configurations. By default, only interfaces deployed with CBQ policies are displayed (the Display only