H3C Technologies H3C Intelligent Management Center - Manual (Page 119)

111
The Summary page appears.
13. Click Finish.
Adding MQC deployment task to deny non-R&D departments accessing computing server and R&D
department
1. Click the Service tab.
2. From the navigation tree, select QoS Manager > Deploy Task.
3. Click Add on the toolbar.
The Deploy Guide page appears.
4. In the Apply Policy to Interface area, click Select Device.
5. Select SR6608 (90.16.0.66) router from the popup window.
6. Click the Select Device Interface icon in the Number of interfaces (outbound direction) column.
7. Select Ten-GigabitEthernet5/0/0 from the popup window.
8. Click Next.
The Setting QoS Policy page appears.
9. Select DenyNon-R&D from the list of Select service.
Figure 43 Setting QoS policy
10. Click Next.
The Basic Information page appears.
11. Configure the following parameters:
{
Task Name—Enter task name Deny Non-R&D Access.
{
For the policy deployed—Select Overwrite.
{
Predefined Execution Time—Select Immediately.
{
Task Description—Enter a description for the task.