H3C Technologies H3C Intelligent Management Center - Manual (Page 15)

7
Figure 5 Accessing the QoS Configuration Info page
4. Click the CAR List, PQ List, or CQ List tab, as shown in Figure 6 .
For information about configuring a CAR list, PQ list, or CQ list, see " CAR List ", " CQ List ", and
" PQ List ."
Figure 6 Configuring a CAR list, PQ list, or CQ list
Creating a deployment task for interface QoS configurations
You can use a deployment task for interface QoS configurations to deploy QoS configurations (not in the
form of QoS policies) to device interfaces and to monitor the deployment process.
To create a deployment task for interface QoS configurations:
1. Click the Service tab.
2. From the navigation tree, select QoS Manager > Deploy Device.
The QoS Device page appears.
3. Click the Operation icon for the device, and select QoS Configuration Info from the menu.