H3C Technologies H3C Intelligent Management Center - Manual (Page 29)

21
QoS function Subfunction Parameters
CBS
• Lower Limit—Start value of the value range for the CBS.
• Upper Limit—End value of the value range for the CBS.
• Granularity—Granularity for the CBS. The CBS must be
an integral multiple of the granularity.
EBS
• Lower Limit—Start value of the value range for the EBS.
• Upper Limit—End value of the value range for the EBS.
• Granularity—Granularity for the EBS. The EBS must be
an integral multiple of the granularity.
PIR
• Lower Limit—Start value of the value range for the PIR.
• Upper Limit—End value of the value range for the PIR.
• Granularity—Granularity for the PIR. The PIR must be an
integral multiple of the granularity.
Green Action
• Remark-local-pre-pass—Mark a packet with a local
precedence value and transmit the packet based on the
new local precedence value.
• Remark-fr-de-pass—Mark a Frame Relay packet with a
DE value and transmit the packet with the new DE value.
• pass—Transmit a packet.
• discard—Drop a packet.
• Remark-ip-pass—Mark a packet with an IP precedence
value and transmit the packet with the new IP precedence
value.
• Remark-mplsexp-pass—Mark an MPLS packet with an
MPLS EXP value and transmit the packet with the new
MPLS EXP value.
• Remark-dscp-ass—Mark a packet with a DSCP value
and transmit the packet with the new DSCP value.
• Remark-dot1p-pass—Mark a packet with an 802.1p
priority value and transmit the packet with the new
802.1p priority value.
• Remark-atm-clp-pass—Mark an ATM cell with a CLP
value and transmit the ATM cell with the new CLP value.