H3C Technologies H3C SecPath L1000-A Load Balancer User Manual
Page 50
42
Validating file. Please wait....
Configuration is saved to device successfully.
# Execute the dir command in user view to display detailed information about the current
directory on the L1000-A.
Directory of flash0:/
0 -rw- 1411 Aug 27 2011 09:36:29 default_local.cer
1 drw- - Jul 13 2011 10:49:09 securitylog
2 -rw- 108 Feb 23 2011 16:48:32 patchstate
3 drw- - Feb 23 2011 16:49:50 test
4 drw- - Jan 06 2011 14:46:09 domain1
5 -rw- 891 Jan 06 2011 14:46:18 default_ca.cer
6 drw- - Jan 06 2011 14:46:07 seclog
7 -rw- 22206 May 16 2012 10:57:45 system.xml
8 -rw- 1327 May 16 2012 10:57:47 startup.cfg
9 -rw- 15253080 Feb 21 2012 14:27:44 main.bin
10 -rw- 223242 Jul 27 2012 10:21:45 aa.diag
1048192 KB total (1031668 KB free)
# Execute the tftp put command in user view to put the file aa.diag to the TFTP server.
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait... |
TFTP: 223242 bytes sent in 0 second(s).
File uploaded successfully.
# Display detailed information about the aa.diag file on the TFTP server.
If you use a PC installed with the Windows operating system as the TFTP server, you can open the
aa.diag file with note book.
3.
Display running status data for multiple feature modules.
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================================
===============running CPU usage information===============
=================================================================
===== Current CPU usage info =====
CPU Usage Stat. Cycle: 19 (Second)
CPU Usage : 3%
CPU Usage Stat. Time : 2012-02-27 09:57:26
CPU Usage Stat. Tick : 0x2e(CPU Tick High) 0x53c7a9c8(CPU Tick Low)
Actual Stat. Cycle : 0x0(CPU Tick High) 0x4e0f47fe(CPU Tick Low)
…