H3C Technologies H3C SecCenter IPS Manager - Manual (Page 90)

84
6. Click Add to enter the page for adding IPS devices, as shown in Figure 84 .
7. Select the device, and click Add. After the device is added, the SecCenter system is ready for
service operations.
Figure 84 Add devices to the IPS management component
NOTE:
You do not need to manually add devices that SecCenter has discovered automatically.
8. On the web interface of the IPS firewall device, set the IP address of the syslog server in the notify
action to that of the SecCenter server, and set the port number to 30514.
NOTE:
The SecCenter IPS Manager uses port 30514 to receive syslogs.