H3C Technologies H3C SecCenter IPS Manager - Manual (Page 27)

21
Figure 19 Service parameter configuration page
CAUTION:
On the service parameter configuration page, the IPS related configuration items are Enable automatic
policy deployment, Enable automatic synchronization of attack signature, and Enable automatic
synchronization of virus signature. Other items will not take effect in IPS management.
Table 23 Service parameters configuration items
Item Description
Enable automatic policy deployment
Automatically deploys and synchronizes the increased
configuration upon policy changes.
Enable automatic synchronization of
attack signature Automatically synchronizes the IPS attack signatures when
connected to the device.
Enable automatic synchronization of
virus signature Automatically synchronizes the IPS virus signatures when
connected to the device.
Configuring management ports
This function allows you to specify the SecCenter background ports for receiving various logs from
devices.
Configuration guide
1. From the navigation tree of the system management component, select Management Ports under
System Config. The management ports configuration page appears, as shown in
Figure 20 .
2. Configure the settings. Table 24 describes the management port configuration items.
3. Click Apply.