H3C Technologies H3C SecCenter IPS Manager - Manual (Page 89)

83
Configuration example
Network requirements
H3C SecCenter IPS Manager works with IPS devices. The IPS Manager collects logs sent by IPS devices,
processes and analyzes the collected data, and presents the information to the IPS Manager users
through web pages.
You need to ensure that the SecCenter can receive logs from each managed IPS device.
Adding IPS devices to the IPS Manager
Adding devices to H3C SecCenter is the prerequisite to other operations, such as querying information
based on the devices. This section describes how to add devices to the H3C SecCenter:
1. Select the system management component, and then select Device List under Device Management
to enter the device management page.
2. Click Add to enter the page for adding a device, as shown in Figure 83 .
3. You can simply input the IP address and label (a string for identifying a device) of a device, leaving
other fields with the default settings.
4. Click Add.
Figure 83 Add a device to the system management component
5. Select the IPS management component, and then select Devices under System Management from
the navigation tree to enter the device management page.