H3C Technologies H3C SecCenter IPS Manager - Manual (Page 75)

69
3. Configure a policy application, as described in Table 71 .
4. Click OK.
Figure 68 Add a policy application
Table 71 Policy application configuration items
Item Description
Please select segment
Required
Select segments to which the policy applies. At least one segment must be
selected.
Policy Type
Required
Select a policy type.
Policy
Required
Select a policy.
Which policies are available depends on the policy type.
Direction
Required
Select a direction to which the policy applies. Options include inbound,
outbound, and both.
Internal Zone IP
Required
Select an IP address group from the dropdown list. The policy applies to all IP
addresses that are in the IP group on the internal zone IP list.
The default option All IPv4 specifies the whole internal zone.
Click
to add an IP address group.
External Zone IP
Required
Select an IP address group from the dropdown list. The policy applies to all IP
addresses that are in the IP group on the external zone IP list.
The default option All IPv4 specifies the whole internal zone.
Click
to configure a new IP address group.