H3C Technologies H3C S12500 Series Switches - Manual (Page 57)

44
Task Command
Clear DHCP server statistics. reset dhcp server statistics
58B
DHCP server configuration examples
NOTE:
By default, Ethernet, VLAN, and aggregate interfaces are down. To configure such an interface, bring the
interface up by executing the undo shutdown command.
DHCP networking involves the following types:
• The DHCP server and clients reside on the same subnet and exchange messages directly.
• The DHCP server and clients are not on the same subnet and they communicate with each other
through a DHCP relay agent.
The DHCP server configuration for the two types is identical.
205B
Static IP address assignment configuration example
331B
Network requirements
As shown in
692H
Figure 16 , Switch B (DHCP client) and Switch C (BOOTP client) obtain the static IP address,
DNS server address, and gateway address from Switch A (DHCP server).
The client ID of VLAN-interface 2 on Switch B is:
0030-3030-662e-6532-3439-2e38-3035-302d-566c-616e-2d69-6e74-6572-6661-6365-32.
The MAC address of VLAN-interface 2 on Switch C is 000f-e249-8050.
Figure 16 Network diagram
332B
Configuration procedure
1. Configure the IP address of VLAN-interface 2 on Switch A:
system-view
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ip address 10.1.1.1 25
[SwitchA-Vlan-interface2] quit