H3C Technologies H3C S12500 Series Switches - Manual (Page 124)

111
• RFC 2464, Transmission of IPv6 Packets over Ethernet Networks
• RFC 2526, Reserved IPv6 Subnet Anycast Addresses
• RFC 3307, Allocation Guidelines for IPv6 Multicast Addresses
• RFC 3513, Internet Protocol Version 6 (IPv6) Addressing Architecture
• RFC 4191, Default Router Preferences and More-Specific Routes
• RFC 4861, Neighbor Discovery for IP Version 6 (IPv6)
• RFC 4862, IPv6 Stateless Address Autoconfiguration
118B
IPv6 basics configuration task list
Tasks at a glance
(Required.)
754H
Assigning IPv6 addresses to interfaces :
•
755H
Configuring an IPv6 global unicast address
•
756H
Configuring an IPv6 link-local address
•
757H
Configuring an IPv6 anycast address
(Optional.)
758H
Configuring IPv6 ND :
•
759H
Configuring a static neighbor entry
•
760H
Configuring the maximum number of neighbors dynamically learned
•
761H
Setting the aging timer for ND entries in stale state
•
762H
Minimizing link-local ND entries
•
763H
Setting the hop limit
•
764H
Configuring parameters for RA messages
•
765H
Configuring the maximum number of attempts to send an NS message for DAD
(Optional.)
766H
Configuring path MTU discovery :
•
767H
Configuring the interface MTU
•
768H
Configuring a static path MTU for a specific IPv6 address
•
769H
Configuring the aging time for dynamic path MTUs
(Optional.)
770H
Controlling sending ICMPv6 packets :
•
771H
Enabling replying to multicast echo requests
•
772H
Enabling sending ICMPv6 destination unreachable messages
•
773H
Enabling sending ICMPv6 time exceeded messages
•
774H
Enabling sending ICMPv6 redirect messages
119B
Assigning IPv6 addresses to interfaces
This section describes how to configure an IPv6 global unicast address, an IPv6 link-local address, and
an IPv6 anycast address.
259B
Configuring an IPv6 global unicast address
Use one of the following methods to configure an IPv6 global unicast address for an interface: