H3C Technologies H3C S12500 Series Switches - Manual (Page 114)

101
113B
Displaying and maintaining UDP helper
Execute display command in any view and reset command in user view.
Task Command
Display information about packets forwarded
by UDP helper.
display udp-helper interface interface-type interface-number
Clear UDP helper statistics. reset udp-helper statistics
114B
UDP helper configuration example
By default, Ethernet, VLAN, and aggregate interfaces are down. To configure such an interface, bring
the interface up by executing the undo shutdown command.
248B
Network requirements
As shown in
749H
Figure 40 , configure UDP helper to forward broadcast packets with UDP destination port
number 55 and destination IP address 255.255.255.255 or 10.110.255.255 to the destination server
10.2.1.1/16.
Figure 40 Network diagram
249B
Configuration procedure
Make sure Switch A can reach the subnet 10.2.0.0/16.
# Enable UDP helper.
[SwitchA] System-view
[SwitchA] udp-helper enable
# Enable UDP helper to forward broadcast packets with the UDP destination port 55.
[SwitchA] udp-helper port 55
# Specify the destination server 10.2.1.1 on VLAN-interface 1.
[SwitchA] interface vlan-interface 1
[SwitchA-Vlan-interface1] ip address 10.110.1.1 16
[SwitchA-Vlan-interface1] udp-helper server 10.2.1.1