Dhcp address pool, Applying an address pool on an interface, Configuring ip address conflict detection – H3C Technologies H3C S12500 Series Switches User Manual
Page 54: Enabling handling of option 82

41
Step Command
Remarks
3.
Enable the DHCP server on
the interface.
dhcp select server
By default, the DHCP
server on the interface
is enabled.
53B
Applying an address pool on an interface
Perform this task to apply a DHCP address pool on an interface. Upon receiving a DHCP request from the
interface, the DHCP server assigns configuration parameters from the address pool to the client.
To apply an address pool on an interface:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Apply an address pool on the
interface.
dhcp server apply ip-pool
pool-name
By default, no address pool is applied
on an interface.
If the applied address pool does not
exist, the DHCP server fails to perform
address allocation.
54B
Configuring IP address conflict detection
Before assigning an IP address, the DHCP server pings that IP address.
•
If the server receives a response within the specified period, it selects and pings another IP address.
•
If it receives no response, the server continues to ping the IP address until a specific number of ping
packets are sent. If still no response is received, the server assigns the IP address to the requesting
client. The DHCP client uses gratuitous ARP to perform IP address conflict detection.
To configure IP address conflict detection:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
(Optional.) Specify the
maximum number of ping
packets to be sent for conflict
detection.
dhcp server ping packets number
The default setting is one.
The value 0 disables IP address
conflict detection.
3.
(Optional.) Configure the ping
timeout time.
dhcp server ping timeout
milliseconds
The default setting is 500 ms.
The value 0 disables IP address
conflict detection.
55B
Enabling handling of Option 82
Perform this task to enable the DHCP server to handle Option 82. Upon receiving a DHCP request with
Option 82, the DHCP server adds Option 82 into the DHCP response.
- H3C SR8800 H3C SR6600-X H3C SR6600 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C S6800 Series Switches H3C S3100V2 Series Switches H3C S12500-X Series Switches H3C S9800 Series Switches