Eneo EKR-32/8 - Manual (Page 127)

8.3.10 Keyboard enabling
Each keyboard is enabled by clicking on the "Keyboard#” ComboBox (where # indicates the keyboard
number). Then the required characteristic is selected.
8.3.11 Relay enabling
Each relay is enabled by clicking on the "Relay #” ComboBox (where # indicates the relay number). Then
the required characteristic is selected. (Refer to figure 18).
8.3.12 Master Monitor
8.3.12.1 Messages on the Master Monitor
The enabling and disabling of message display on the master monitor can be configured by clicking on the
arrow of the "Display Message" ComboBox and selecting YES for enabling and NO for disabling. (Refer
to figure 18).
8.3.12.2 Video inputs exclusion
The exclusion method of the video inputs is configured by clicking on the arrow of the “Exclusion”
ComboBox and by selecting one of the three modes proposed.
Insert, in minutes, the value of the autoreturn interval in the "Autoreturn" field.
The choice of the replacement camera is selected by clicking on the selected camera RadioButton in the
“Replacement Camera” box. (Refer to figure 18).
• 8. Configuration software Page 59/65 MNNCEKR328_0439
figure 18: Keyboard, relay and master monitor enabling
It is possible to choose
the configuration
required by clicking on
the arrow
Keyboard 1
ComboBox
Selection of the
substitutive
camera
Selection of the
exclusion mode
Input of the
automatic return
in minutes
Enabling of
the messages
on the master
monitor