Eneo EKR-32/8 - Manual (Page 107)

The following is an example of a request by K2 for a PAR1 camera:
7.5.3 Setting up the matrixes
In menu 2.1.4 Setup system/Video and installation/Setup set PARALLEL in each of the two
matrixes and select Matrix ID number1 for matrix PAR1 and 2 for PAR2.
Up to 9 matrixes can be connected in parallel.
Connect the two matrixes on a single RS485 line using the AUXA connector. The connector is no longer
available for controlling devices in cascade with respect to the matrix. The AUXA connectors of the two
matrix that represent the ends of the line must be loaded.
• 7. Appendix 2: composite installations Page 39/65 MNNCEKR328_0439