Eneo EKR-32/8 - Manual (Page 122)

8.3.6 Date
Through the configuration program it is also possible to choose whether the data is shown on the monitor.
Furthermore, the format and position of the date can also be configured.
Date settings. Click on the arrow of the "Current Date" ComboBox. Choose the required date from the
calendar that appears.
Format setting. Click on the arrow of the “Format” ComboBox and choose one of the proposed formats
(YYYY/M/DD, DD/MM/YYYY, MM/DD/YYYY).
Date enabling. Click on the arrow of the “View” ComboBox and select the YES option if you wish to enable
the date that will be shown on all the monitors, otherwise choose the NO option.
Date position. Click on the arrow of the “Position” ComboBox and select the position required.
8.3.6.1 Closure sequences
When the “Use closure seq.” CheckBox is clicked on, three boxes will appear for the setting of the times,
holidays and opening hours. If you do not want to use this function, remove the tick by clicking on the
CheckBox.
• 8. Configuration software Page 54/65 MNNCEKR328_0439
figure 14:
Date format
Impostazione
data Date setting
It is possible to
input a date other
than the PC date
default
Enabling of date
appearance on
monitor
Date position
selection
Time Band, holiday
and closing hours
enabling/disabling