Eneo GLS-2302H - Manual (Page 7)

7
3. Description of the Front/Rear View
3.1 Front Panel
3.2 Rear Panel
1. Plug Inlet: A DC V inlet that connects to an external power supply.
2. ETHERNET 10/100 connector:
This is a standard RJ-45 connector for 0/00 Mbps Ethernet networks. PoE (Power over Ethernet) function:
Provides power to the device via the same cable as used for the network connection.
3. SD indicator: The green light indicates the SD card cannot be removed.
4. SD/SDHC CARD slot: This is used for updating system software and archiving / accessing critical images.
5. USB port: The user can use a USB device cable to connect the Video Server to the USB port on the PC.
1. AUDIO IN: The connector is used to connect the audio output from other devices to the Video Server.
2. AUDIO OUT: Provides the Video Server’s audio signal to a speaker or stereo
3. Video in connectors: The BNC connector is used to connect to the video output from the camera.
4. ALARM I/O: This is an 8-PIN connector including the DIGITAL IN/OUT and RS-485 items for connecting with
external devices.
5. RESET: Returns to factory default
6. POWER indicator: Indicates the power status of the unit